Category Product Lists

Ultra Power 4AC-Plus 2-4S LiPo, 4-8S NiMh, 3A, 30w 240v Charger.

Features

• Conveniently powered by 110V AC with an integral balance connector port
• Easy to use
• Three selectable charge rates (1A, 2A, 3A)
• Charges 2S-4S LiPo and 4-8 cell NiCd and NiMH packs
• Lightweight, compact and easy to transport
• Ultra Power 4AC-Plus Charger
• Charge Lead with 1 x EC3 connector and 1 x Deans connector
• Power cable
• User Manual

Economical 240VAC input wall mount overnight Charger. 
Charges 2 or 4 x AA/AAA NiCd/NiMH cells. 
User intervention for charge termination. Red light indicates unit is charging.

No green light to indicate full charge status. User must remove batteries once charge time has elapsed. No Negative DeltaV detection or timer based charging for this low cost economical unit. LED will always stay Red. Batteries that are warm usually indicate near full charge state.

Output Current AA 250mA, AAA 120mA.

Maverick USB Charger

Celectra 2S 7.4V DC Li-Po 700mAh Charger

Specification

• Battery Type:LiPo (3.7V per cell)
• Input Voltage: 12V DC
• Output Connector: Balance
• Part Type: Electronics

Charger manufacturers come and charger manufacturers go, however G.T. Power, it seems, is here to stay. Widely regarded as providing the best quality battery charging and care devices available in the RC world its products have made many friends over the years and, indeed, the X2 Mini is set to follow the trend. Offering an impressive 200W of charge power split between two independent 100W channels, the X2 is able to charge batteries with a much higher amperage in far less time. And, of course, with twin outputs, two batteries can be charged at the same time, using completely separate charge or discharge routines. With a choice of mains or 19-26V DC input, the X2 is ideal for use both at home and at the field, track or lake. Moreover the backlit LCD makes it simple to select the charge parameters while also monitoring a battery's status in any light. Compatible with today's numerous cell technologies this tidy unit is not only powerful and compact but convenient and versatile too, allowing it to travel with you to satisfy any number of multi-chemistry charging tasks.

Features

• AC or DC input power.
  
• AC 100W shared over two channels.
  
• DC 100W x2.
  
• Blue backlit LCD (2 x 16).
  
• 2-14V lead-acid (Pb) x 2.
  
• 0.1-10.0A charge rate in 0.1A increments.
  
• 1-8 cells NiCd / NiMH x 2.
  
• 1-4S LiPo / LiHV / LiIon / LiFe x 2.
  
• Cell balance with 0.01V tolerance.
  
• Proven XT60 battery ports.
  
• Built in balancers with XH style connectors.
  
• Recall data for up to ten batteries.
  
• Compact size.

Includes

• 1x X2 Mini multi-function battery charger.
  
• 1x Mains power lead.
  
• 1x Comprehensive instruction manual.

Requires

• XT60 charge leads with connectors to match your batteries

A USB-powered quick charger that supports AA and AAA nickel-metal hydride batteries.

71998 KYOSHO SPEED HOUSE 800HV Excellent compatibility with AAA Ni-MH batteries.

Compact AA/AAA NiMH charger powered by USB. Up to 1A charging per slot. USB power supply sold separately.

The four charging circuits are controlled completely independently, and the operation is as simple as setting the battery.

Specification

• Recommended power supply: USB adapter Output 2.0A or more
• Charging current: 0.8 to 1.0A
• Charging time: AAA type about 1 hour / AA type 1.5 to 3 hours
• *It may take longer depending on the power output.
• Body size: about 59 x 63 x 25 mm

The iMars D1000 Charger is a new generation versatile and intelligent dual channels charger that with function of charging, discharging, and battery cycling functions.

As the new part of G-Tech Eco, iMars D1000 Charger is supporting both G-Tech smart battery and regular non-G-tech batteries.

When a G-Tech smart battery is connected to the iMars D1000 charger, the charger will automatically identify the battery type, voltage through the smart balance connector, and charging current recommended by the battery manufacturer. For non-smart batteries, it is necessary to manually select the battery type and the required working mode to get started.

Packed with features, the D1000 Charger includes a comprehensive charging capacity display, voltage difference monitoring, IR detection, and boasts a compact, lightweight design for easy portability. The wide-view IPS display enhances the user experience, and the charger supports high-power charging up to 25A.

Safety is paramount with the D1000 charger, offering a suite of protections including over-temperature, over-current, over-charge, over-voltage, disconnection, short circuit, single-cell low voltage, and reverse polarity protection. The charger operates in Three modes – charge, storage, cycling.

During charging, real-time monitoring ensures the battery's status is closely tracked, automatically ceasing charging when the battery reaches full capacity.

Grepow bring the new function of the battery cycling to the market, during cycling function, D1000 will based on the user setting to charge or discharge to the end voltage for each cell, when the charge operation done, D1000 charger will automatically re-charge battery back to the setting voltage as a fully discharge and charge cycle, and cycle numbers could be set up by users.

Features

• Intelligent recognition with G-Tech technology
• Dual channels with fully independent functions
• Compact and flexible, with 25A charging current
• LiPo/LiHV 1-7S (supports G-Tech/Non G-Tech battery)
• Cycling function support users setting up.

Suitable for all NiMH 6-7 cell batteries for the Traxxas cars that have ID batteries

Sleeker Than Ever

T200 comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCD. All the programmability you expect of a modern higher-level charger is built in!

Multiply the Efficiency with Duo

With each charging channel programmed and operating independently, T200 allows you to charge two batteries simultaneously, and it will intelligently and automatically charge the packs at once to their maximum capacity. To top of it, the cells being charged do not even necessarily have the same configuration or be of the same chemical type.

Multi-purpose for Most Chemistries With Generic XT60

The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead acid). With the almost de facto standard of XT60* interface, plugging prevents reverse polarity and ensures super-solid connection.

*Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80℃ thanks to their gold-plated spring pins’ better contact surface area.

Versatile With the Addition of AGM and Cold Modes

AGM(Absorbent Glass Mat) battery is maintenance free, provides good electrical reliability and is lighter than the flooded lead acid type. However, AGM batteries are far more different than lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode.

Optimized Operating Software

SkyRC T200 features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two-way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

Intuitive Operation

The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. The charging programs with the same logic as many other chargers by SkyRC, so it will be familiar to many users. But even if T200 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. After one run through the manual, you’ll have it down.

Terminal Voltage Control(TVC)

The charger allows users to change the end voltage. (for the expert user only)

Portable With a Handle

Compact design with the handle ensures the charger is convenient to travel with.

Universal-Voltage Input

With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around!

Comply with safety and EMC regulation

T200 complies with the laws and regulations into each country we ship. Our products are designed, tested and approved to meet worldwide standards for Product Safety, Electromagnetic Compatibility and other regulatory compulsory requirements, when used for their intended purpose.

Experience the next level of charging with SkyRC D100neo, the latest and upgraded version of D100 charger, packed with innovative features and improved functionality.

Featuring two charging ports, SkyRC D100neo delivers a total power of 200W and 10A per port, allowing simultaneous charging of multiple chemistry batteries. With a balance current of 1000mA per cell, it speeds up balancing among battery cells, enhancing the charging process. The high precision balancer ensures impressive accuracy of ±0.02V, optimizing voltage equalization.

Whether you're a seasoned professional or a passionate hobbyist, this charger takes your RC charging to new heights.

Efficient, yet compact

Outrageous performance is packed through 2 Independent ports in the compact footprint.

You can simultaneously charge two RC batteries with two ports, even in different chemistry. Whether you need to power up your RC car or fly a drone, D100neo has you covered!

Despite its small size, the D100neo doesn't compromise on power or efficiency with up to 200W on an output! The charger boasts a vibrant color display featuring a remarkable 76,800 pixels, surpassing the 8,192-pixel black white screen of the D100.

*When powered by DC,D100neo can output up to 200W of charging power.

Do more with one charger! Multiple chemistries go

With exceptional versatility, D100neo can charge a wide range of battery chemistries. This powerhouse can charge from LiPo and LiFe to Li-ion, LiHV, Pb, NiMH, and NiCd.

You are turbocharging your time with a single charger that can handle multiple battery types.

Whether you're an RC guru, a beginner, or somewhere in between, D100neo is the reliable and adaptable choice that ensures optimal performance for all your batteries.

Unlock the full potential of your battery arsenal with D100neo – versatility multiplied capability.

Dual AC/DC input

D100neo is designed to provide RC enthusiasts unparalleled flexibility in the garage or out in the field. With dual port input, you have the freedom to choose between AC or DC input based on your specific scenarios.

In AC mode, the charging power reaches an impressive overall 100W, dynamically distributing to each port.When powered by DC, the charger unleashes its true potential, offering an astounding overall 200W of charging power. With a single port capable of reaching up to 100W, you can power up your batteries with remarkable speed and precision.

Whether you are a beginner or a seasoned RC guru engaging in racing, D100neo ensures efficient charging and optimal performance for your RC batteries.

Unmatched charging, impressive discharging

This cutting-edge device not only offers efficient charging but also provides impressive discharging functionality. The built-in balance port enables D100neo to discharge faster, allowing it to discharge at up to 25W when used in conjunction with the main port. In contrast, the discharge rate when using the main port alone is limited to 5W.

Whether you need to prepare your batteries for storage, balance their voltage levels, or safely discharge them after use, the D100neo is there for you!

This advanced discharging feature allows you to maintain the health and longevity of your batteries by precisely controlling the discharge process.

So pro, so digital power

D100neo excels not only in charging, but also as a versatile dual-output digital power supply.

With just a few clicks on the menu, D100neo offers a voltage option, from 2V to 27V, with an adjustable increment of 0.1V. Additionally, the current can be adjusted from 0.2A to 10A, with a precision of 0.1A.

This dual-output digital DC power supply provides two independently controllable power outputs, making it a versatile tool for various electronic testing and prototyping applications.

20W PD 3,0 port energize with rapid power delivery

With the 20W USB-C PD 3.0 charging port, our RC players can enjoy rapid charging speeds like never before. Whether you're charging your smartphones, tablets, or 2020 MacBook Airs, this powerful port ensures that you can fuel up your devices in a fraction of the time.

Charge it cool

Within the sleek enclosure lies a groundbreaking thermal system designed to let Arm Cortex-M4 fly through heavy workloads at screaming-fast speeds — and stay whisper quiet. The fan will adjust the speed accordingly and dissipate heat more effectively according to the different power usage.

Enhanced protection and rectifier circuit effiency multiplied

The SkyRC D100neo charger is built-in with several essential safety features ensuring optimal charging safety.

Also, The D100neo uses a proprietary rectifier circuit to efficiently convert DC into safe D/C power for battery charging. And its onboard MCU precisely controls the charging to minimize power loss to create an incredibly compact form factor.