Category Product Lists

Carrera GO!!! 61651 Guardrail Fences

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• 10 privacy fence (5 gray pieces and 5 red pieces).

Contains Radius 1 Hairpin Curve 90 degree x 2.

For use with C8246 Side swipe straights. Push-fit Scalextric track for quick and easy circuit building. Shown with C8279 Radius 1 Curve Inner Borders 180° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

1 x connecting section (2 x 34,5 cm)

A special kind of lane change

If you equip your Carrera race track with this lane change section, you will be able to switch driving lanes in a cool and casual way. The lane on the track element is S-shaped, so that it becomes a real eye-catcher when the Carrera slot cars change track. You can give free rein to your creativity when using the track element. Especially if you install several lane change tracks one behind the other, a cool track section is created in the blink of an eye, which is simply fun to drive through again and again. The lane change track on a scale of 1:24 consists of two parts, each with a length of 345 mm. You can use the lane change for your Carrera DIGITAL 124, DIGITAL 132 and EVOLUTION race tracks.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Track element for changing lanes
• DIGITAL 124, DIGITAL 132, EVOLUTION
• To expand your race track
• Package contents: 1 piece (2 track parts, each 34.5 cm)

This Shoulder connection section offers the possibility of connecting a digital accessory (Position Tower, Startlight, etc.) to a border if you use an Adapter Unit track. The shoulder connecting section is equivalent to the length of half a straight (17,25 cm) and may only be connected to the Adpater Unit 30360.

Contains

• x1 Shoulder connecting section
• x1 Shoulder complement
• x4 Track section bolts

This accessory is compatible with the following systems

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Carrera GO!!! 61614 Extension Set 3

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• x8 Carrera GO!!! 61602 Straight
• x4 Carrera GO!!! 61611 Radius 1 Curve 45°
• x4 Carrera GO!!! 61612 Radius 1 Banked Curve 45° incl. supports

Contains Radius 3 Curve Outer Borders 22.5 degree x 4.

Shown with C8204 Radius 3 Curve 22.5° and C8281 Radius 3 Curve Inner Borders 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.

One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Breathtaking drifts are now possible

You can extend your Carrera race track on a scale of 1:24 to include outside curbs. When it comes to looks, these curbs always look good. But they are especially useful if you want to drive on your Carrera DIGITAL 124 race track with the slot cars on a scale of 1:24. This is not a problem on the straights, but drifting in the corners has been very difficult so far as the cars have often slipped off the track. Thanks to the outside curbs, this no longer happens that easily. The set includes six attachments for 30° corners, each with two end sections. You have assembled the outside curb for a 180° corner. The curbs are suitable for the race tracks Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION on a scale of 1:24.

• Extension parts – outside curbs for Carrera race tracks on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For decorating and expanding the track
• Package contents: 6 pieces – outside curbs for 1/30° corner, 2 pieces – end sections

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Always bigger, always faster – this extension set makes it possible!

In the course of time, you will also become fixated on making your Carrera race track more and more versatile and exciting. But what's the best way to do that? As a first step, we recommend the use of additional track components. These allow you to construct your track anew and extend it with additional elements. In this extension set you will find many different tracks that will support you in your "rapid Carrera race track” project. Four standard straight sections, two lane changes, two narrow section tracks and four cornered sections with 2/30°, as well as the matching track locking mechanisms come with this set to your home. All included track parts are on a scale of 1:24 and can therefore be used for the Carrera DIGITAL 124, the Carrera DIGITAL 132 and the Carrera EVOLUTION race tracks.

This accessory is compatible with the followingn systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Versatile Carrera extension set for race tracks on a scale of 1:24
• DIGITAL 124, DIGITAL 132, Carrera EVOLUTION
• To extend and expand your race track
• Package contents: 4 pieces – standard straight sections, 2 pieces – track change, 2 pieces – narrow sections, 4 pieces corners 2/30 degrees, track locking mechanisms

Carrera GO!!! 61645 Radius 3 Curve 45° (4 pcs)

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• Radius 3 Curve 45° x4
• Guard rail and supports