Category Product Lists

Unicorn Gundam's rival and the successor Mobile Suit to Char's Sazabi, main antagonist machine Sinanju from the "Mobile Suit Gundam Unicorn" serial novel gets the coveted Master Grade treatment!

This very impressive Ver. Ka ("Version Katoki") release was produced by acclaimed Gundam mecha designer Hajime Katoki, whose signature style helps make this snap-fit plastic kit one to remember! Molded in color, Sinanju will be fully poseable upon completion, right down to its individually articulated fingers! Other features include an openable cockpit hatch, and thrusters on its backpack that can slide open. Its array of weapons includes a Beam Rifle with grenade launcher attachment, a pair of Beam Axes and Beam Sabers, and a shield. Both a sheet of waterslide decals and foil stickers are provided so you can choose which one you prefer for the model. A sheet of marking decals is also included to add further detail to this sharp-looking mech. There's even an in-scale figure (molded in red) of Sinanju pilot Full Frontal! The Neo-Zeon remnant forces stay strong in combat with Sinanju leading the way!

Item Size/Weight: 39 x 31 x 12.5 cm / 1120g

Following on the heels of the Dom kit comes Bandai's Master Grade Rick-Dom. Differences with the first release are a different tail and backpack unit, different soles (of the feet), and new weapons, especially that huge beam bazooka. And of course, all the Master Grade goodies you'd expect are here! Fully posable at all joints; extensive internal detail; individually posable finger joints and more. Like all Master Grade releases, the kit is molded in color, and features snap assembly. 

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam Universe.

There's no better justice than Infinite Justice--and Bandai does justice to the Mobile Suit with this highly anticipated Master Grade release!

This sharply detailed snap-fit kit of Athrun Zala's personal Mobile Suit comes molded in color, and upon completion the mech will be fully poseable with polycapped joints that allow for posing possibilities galore. This kit introduces to the MG series a new joint system for its side skirt armor that allows you to pose Infinite Justice Gundam kicking, as seen in "Gundam Seed Destiny"!

Included are a beam rifle that can be mounted on its back skirt armor, two "Super Lacerta" Beam Sabers that can combine to form a double-bladed beam weapon, and a left arm-mounted shield that stores a detachable "Shining Edge" Beam Boomerang and Grapple Stinger (a bendable wire is provided to display it in mid-deployment). Beam effect parts for the Beam Sabers, "Griffon" Beam Blades connecting the knees and feet, Beam Boomerang, and shield are provided as well.

Accompanying Infinite Justice Gundam is the Phantom-01 backpack that can be attached to the mech's back for a boost in speed and firepower. The engine covers can slide out to reveal detailed vernier nozzles. Two same-scale unpainted figures (molded in white) of Athrun in standing and sitting poses are included, along with dry-transfer decals, stickers, and foil stickers for detail. (Bandai's Action Base shown in the photos below is sold separately.)

The High Mobility Type Zaku Pyscho Zaku gets Hajime Katoki's loving touch in this amazing kit!

The cockpit hatch can be opened, and it's armed with the Beam Bazooka, three Giant Bazooka, two Zaku Machine Guns, two Heat Hawks, and three Sturm Fausts, and more!

This deluxe "Sengoku no Jin" box set packs the previously released MG Shin Musha Gundam MG kit, this time molded in gloss colors and shiny gold plating, together with brand new accessories including a gorgeously illustrated folding screen, dedicated stands for each weapon, and a custom base to create an eye-catching presentation resembling a traditional Boys' Day samurai doll display!

Designed by Hajime Katoki, the undeniably cool samurai-armored Shin Musha Gundam was created for use in Koei's "Gundam Musou" video game franchise. This kit of the powerful Mobile Suit comes sharply molded in gloss colors with gold plating on some armor parts, and can be assembled with snap-fit ease. The super-poseable inner frame from the Master Grade RX-78-2 Gundam Ver. One Year War 0079 is used to give Shin Musha Gundam a world of posing possibilities, and the well-jointed shoulder- and skirt armor assist with movability without getting in the way. Weapons include its Nichirinmaru katana with sheath, Denkoumaru naginata, Sankoumaru jumonji yari, and a Tanegashima gun.

The blades for each melee weapon have silver mekki plating for extra realism! Marking stickers and Gundam decals are provided for added detail and give you the choice of completing the kit with either Hajime Katoki's markings or the plastic model kit original-version markings!

The extras, special gloss color molding, and gold plating make this extra special and a worthy spotlight addition to Gundam modelers' collections, even if you already own its initial MG kit release!

Item Size/Weight: 39 x 31 x 12.3 cm / 1170g

More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot!

Features

• From the "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses.
• Weapons include three beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword.
• A display stand is included to assist with mid-air poses.
• Sharply molded in color, this snap-fit assembly kit does not require any cement or paint to complete (of course, the use of paint will improve the appearance of a finished model).
• Stickers and dry transfers are included for markings.

This amazing kit allows you to build the Unicorn Gundam in either the Red Frame or Green Frame version, with gleaming titanium-finished parts! (It must be noted that once you choose which one to build, it will not be possible to remove the parts to build the other version.) Includes parts to build a shield, beam magnum, two beam sabers and a hyper bazooka!

Item Size/Weight: 39 x 31 x 10.6 cm / 990g

The Gundam Fenice Rinascita is finally here!

Features

• Molded in green, red, black, gray, two shades of clear pink, clear green and pale tan, this snapfit kit
• needs no painting to look awesome (although a bit of paintwork will make it even more amazing).
• Decals and foil stickers are provided for the markings
• Base is provided too!

Inspired by the iconic Gundam Seed Destiny anime series, we present the Destiny Gundam model kit, meticulously crafted in an impressive 1/100 scale. Once assembled, this kit transforms into a fully articulated figure, allowing you to recreate your favorite scenes and dynamic poses from the show. The Destiny Gundam kit is a comprehensive package, providing you with all the armaments wielded by this legendary Mobile Suit. Equip your Destiny Gundam with the powerful anti-ship sword, launcher gun, beam rifle, dependable shield, versatile beam boomerang, trusty beam saber, and palm cannon parts, ensuring it's ready for any battle scenario. Additionally, a display stand is thoughtfully included, allowing you to proudly showcase your completed model, making it a focal point in your collection.

Features

• 1/100 Scale: A significant size that captures the details of Destiny Gundam perfectly.
• Crafted from durable plastic materials to ensure longevity.
• Rooted in the beloved Mobile Suit Gundam SEED Destiny series.
• After assembly, the figure is fully articulated for dynamic and realistic posing.
• Please note that the instruction manual may or may not include English translations.

Contents

• Destiny Gundam: The star of the show, ready for your assembly.
• Anti-ship sword: A formidable melee weapon.
• Launcher gun: For versatile firepower.
• Beam rifle: Perfect for long-range combat.
• Shield: A reliable defense option.
• Beam boomerang: Adding another dimension to your arsenal.
• Beam saber: Essential for close-quarters encounters.
• Palm cannon parts: Expanding your options.
• Two minifigures: Enhancing the authenticity of your model.
• Display stand: A platform to exhibit your completed Destiny Gundam.
• Instruction manual: Offering guidance throughout the assembly process.

Previously released back in 2003, Bandai's upgraded Master Grade kit of the Ex-S Gundam/S Gundam from "Gundam Sentinel" features some parts inspired by the MG Deep Striker! You can assembly it as the Ex-S or the S, and you can display it in its separated forms (G Core, G Attacker and G Bomber) too. The head, shoulders, chest and backpack are all inspired by the Deep Striker, and the shape-changing parts of the abdomen are also reshaped. This kit is molded in color so painting isn't necessary.

Includes

• Beam saber/beam cannon x2
• Incom 3x3
• Foil sticker sheet
• Marking sticker sheet
• Lead wire x3
• Screw x27

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam Universe.

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

A highly detailed and articulated snapfit kit of the Sengoku Astray Gundam. Molded in multiple colors, with stickers for decoration.

Item Size/Weight: 39.5 x 31 x 9.5 cm / 780g

This Master Grade (MG) model kit features the Gundam Mk 2 Ver 2.0 as seen in the “Zeta Gundam” anime and features styling and engineering found on the previously released larger PG Gundam MK 2, but shrunken down and refined. Includes beam rifle, bazooka, beam sabers, ammo, shield that can retract and optional head Vulcans. A display hangar for recreating launching and maintenance scenes is included for the AEUG version.

Features

• 1/100 scale
• Made of PE and PS
• From Mobile Suit Zeta Gundam
• Fully poseable figure once assembled
• Instructions may or may not include English translation

Contents

• RX-178 Gundam Mk-II
• Beam rifle
• Bazooka
• Beam sabers
• Ammo