Category Product Lists

This high-end metallic color uses high-grade special pigments that have been ultra-finely refined using high-purity technology, resulting in a thin coating that produces a solid metallic color.

The Premium range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour and Spray!

The SMS Washes are formulated to be less harsh on plastics compared to similar hobby products. Using an oil based paint, they are easy to clean up and provide a subtle effect on your model kits panel lines. (NOTE: For best results, always seal the layer of paint with PL09 GLOSS CLEAR first before applying the Wash. A smooth, gloss surface will allow for an even coverage within the panel line when the wash is applied)

Updated Bottle - Now 18ml!!!

We have introduced a new formulation that will surprise you with its amazing brushability, excellent opacity and superb matt finish.

You will notice that the colors dry quickly, forming a homogeneous and self-leveling layer that respects the smallest detail present in your model. In fact, we recommend applying them on a previously primed surface.

Packaging: Model Color is presented in bottles of 18 ml/0.6 fl oz with eyedropper. This packaging prevents the paint from evaporating and drying in the container, so that It can be used in minimal quantities and preserved for a long time.

Mr. COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. A wide range of colours are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colours and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING

• 1 : 0.8~1.0
• (Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

• 1 : 1~2
• (Mr. COLOR : Mr. COLOR THINNER)
• Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.

Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
• LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.

Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats if painting with a paint brush, or 2 to 3 coats if airbrushing.
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.

Mr. CRYSTAL COLOR is a line of high quality pearl paints. Although the color itself is clear, it provides iridescent finishes to painted surfaces and reflects light in a color tone. The shine is subtle, compared to metallic paints, however its pearl-like shimmer is visible from every angle.

Suitable for car models, character models, figures, and many more.

The colors would appear differently depending on the color of the base. If applied over a white base, the surface will have a shimmery pearl-like effect. If applied over a black base, Mr. CRYSTAL COLOR gives a metallic feel to the surface.

To add more glossiness, apply 2 coats of clear paints.

AIRBRUSHING IS HIGHLY RECOMMENDED

THINNING RATIO for Mr. CRYSTAL COLOR

BRUSH PAINTING

• 1 : 0.8~1.0
  (Mr. CRYSTAL COLOR : Mr. COLOR THINNER)

AIRBRUSHING

• 1: 1~2
  (Mr. CRYSTAL COLOR : Mr. COLOR THINNER)

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.

Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CLEAR COLOR, Mr. CRYSTAL COLOR,
• Mr. METALLIC COLOR GX, Mr. SUPER METALLIC
• LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

HOW TO APPLY Mr. CRYSTAL COLOR

Prepare the base before applying Mr. CRYSTAL COLOR. After drying the base color, apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing. Let each coat dry for few hours.

Apply 2 coats of clear paints if needed, to achieve extra glossiness.

Mr. COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. A wide range of colours are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colours and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING

• 1 : 0.8~1.0
• (Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

• 1 : 1~2
• (Mr. COLOR : Mr. COLOR THINNER)
• Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.

Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
• LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.

Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats if painting with a paint brush, or 2 to 3 coats if airbrushing.
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.

Updated Bottle - Now 18ml!!!

We have introduced a new formulation that will surprise you with its amazing brushability, excellent opacity and superb matt finish.

You will notice that the colors dry quickly, forming a homogeneous and self-leveling layer that respects the smallest detail present in your model. In fact, we recommend applying them on a previously primed surface.

Packaging: Model Color is presented in bottles of 18 ml/0.6 fl oz with eyedropper. This packaging prevents the paint from evaporating and drying in the container, so that It can be used in minimal quantities and preserved for a long time.

The Air series paint is designed to be effective for airbrush and brush, and is water- soluble, avoiding strong smells and harmful solvents. Formula ultra-resistant and satin. Nontoxic. It can be easily thinned with our specific acrylic thinner or water if necessary. We recommend AK-712 Acrylic Thinner for thinning. There’s no need to dilute the paints when you decide to use your airbrush. When applied by brush they also have a greater degree of coverage. Use alone or mix with other acrylic paints to obtain a different color. Shake before each use. Dries completely in 24 hours.