Category Product Lists

Designed and developed with the hobby community, Speedpaint now includes 90 colours, industry-first one-coat metallics, and an advanced formulation for speed and performance that meets the demands of painters of all skill levels.

Simply apply one coat of Speedpaint directly over a white primed miniature and you are done! The Speedpaint will instantly create intense shading, vibrant colour, and a highlight effect in one application.

Speedpaint 2.0 is also a great solution for fast basecoats! Once your Speedpaint has dried, you can begin highlighting with acrylic paints in minutes, not hours. Thanks to its speed, ease of use, and vibrant colour - this versatile range of paints will no-doubt help you get more time for gaming.

Features

• One-coat painting solution
• Consistent flow across all colours
• Perfect contrast
• Intense shading and highlighting effect
• 18ml spill-free dropper bottles
• Mixing balls pre-loaded in each bottle

Before using Speedpaints, we recommend priming your miniatures with Colour Primer Matt White, Colour Primer Brainmatter Beige or Colour Primer Ash Grey to achieve your most vibrant results. However, you can also experiment with other Colour Primes like Necrotic Flesh, Skeleton Bone, or Gun Metal etc. to achieve other cool effects.

TIP: Use A Hard Palette A hard palette is recommended for Speedpaint. If you use our Wet Palette, there’s a chance that the Speedpaint will bleed through the Hydro Sheet and stain your Hydro Foam.

How to use:

Tamiya TS spray paint is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car model bodies.

NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.

The Premium range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour and Spray!

Mr. COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. A wide range of colours are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colours and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING

• 1 : 0.8~1.0
• (Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

• 1 : 1~2
• (Mr. COLOR : Mr. COLOR THINNER)
• Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.

Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
• LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.

Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats if painting with a paint brush, or 2 to 3 coats if airbrushing.
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.

The Premium range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour and Spray!

The AIR label identifies specific colors for painting Aircraft of all ages.

Very special tones used by different armies in different periods (FS, RAL, etc.).

Latest generation colors, with a new technologically superior formula to paint with a brush and airbrush, avoiding the traditional clogs when diluted.

Non-toxic, very high pigmentation, coverage and resistance for models kits, miniatures and modeling in general.

The new cap allows you to quickly identify the color.

It comes in 17ml bottles.

Mr Color hobby paint is a paint that has long been regarded highly by modelers world wide as a model paint that delivers an outstanding finish. There are a large number of colours and colour types available, which are suitable for painting almost all models. Generally, Mr Color provides a wider range of paint colours and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

When applying Mr Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.

If airbrushing Mr Color paint, it should be thinned after diluting to a ratio of between 1 (Mr Color) and 1 to 2 Thinner, depending on the degree of paint viscosity required.

Gloss levels obtained using gloss coat Mr Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING
1 : 0.8~1.0
(Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

1 : 1~2
(Mr. COLOR : Mr. COLOR THINNER)
Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

• Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
• Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
• CHOOSE AN APPROPRIATE THINNER
• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
  LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.