Category Product Lists

Tomix Island Home Series.

Features

• An island-style platform that can accommodate large trains such as the Shinkansen
• The platform is made up of three blocks, which are connected with a special joiner using a one-touch system
• Fits into rail pattern B
• You can enjoy attaching the included roof, benches, ashtray, trash can, water dispenser, station sign, lighting, etc.
• The included staircase parts allow you to install stairs leading to the basement on the platform (drilling holes with a utility knife is required)
• Covered island platform
• End platform R for large vehicles
• End platform L for large vehicles
• Runners for station name, car number, lighting, etc.
• Runners for chairs, ashtrays, trash cans
• Shop
• Stairs
• Light roof
• Joints
• Stickers

A typical Station Building in the style of many of those found across the southeast of England.

Specifications

• Item Length - Without Packaging (cm): 11.4
• Item Height - Without Packaging (cm): 10.2
• Item Width - Without Packaging (cm): 16.7
• Item Scale: 1:76 Scale 00 Gauge
• Finish: Painted
• Colour: Multi
• Operator: SER
• Designer: South Eastern Railway
• Number of Parts: 1

If you are looking to extend your railway platform or add a twist to it then the Curved Platform (Small Radius) will do just that!It fits inside first-radius curved track and clips to other Hornby platform sections. Length: 136mm.

Two pieces of Island Platform - with platform edges on both sides. Each unit 165x68x19mm.Model is made from resin and then hand decorated to create a realistic, highly detailed brickwork and pavement finish.

Specifications

• Item Length - Without Packaging (cm): 10
• Item Height - Without Packaging (cm): 11.8
• Item Width - Without Packaging (cm): 24
• Item Weight - Without Packaging: 0.39
• Item Scale: 1:76 Scale 00 Gauge
• License: No
• Finish: Painted
• Colour: Multi
• Gauge: OO
• Operator: Hornby
• Designer: Hornby
• Number of Parts: 2

A set for assembling a fully roofed straight-end platform on an island platform (urban type).

*This set cannot be used alone. It must be used in combination with the island platform (urban type) extension (sold separately).

Features

• By combining the island platform (urban type) extension with this set, a fully roofed straight-end island platform can be constructed (a platform of 280 mm can be constructed at a minimum, and each additional island platform (urban type) extension can be added to extend the platform by 280 mm)
• *The island platform set (urban type) cannot be used in combination with this set
• End fences can be attached to the island platform end
• The island platform end has stairs to descend from the platform to the tracks, and the stairs also serve as a lighting contact point for the lighting platform, so it is compatible with illuminated island platforms.
• The design also prevents people from falling from the stairs to the ground, even when used on elevated lines
• *If there is a wall attached to the rails, cut the wall according to the instructions in the manual so that people can descend from the stairs to the tracks
• The island platform end has a user-cut guide to prevent the protruding parts of various rails from interfering with the island platform end and making it impossible to assemble, with simple processing by the user
• Includes a platform end base to allow an emergency stop alarm to be attached to the island platform end when used with 18.5 mm wide rails
• *The emergency stop alarm is not included in this set. Use the included parts for the separately sold island platform (urban type) extension, which is used in combination with this set.
• *When using rails other than 18.5 mm wide, if you want to install an emergency stop alarm at the end of the platform, drill a φ1.0 hole with a commercially available pin vise or similar tool at the location specified in the instructions and install it (for advanced users).

A sturdy double track engine shed with lots of detailing.

With laser cut roof trusses that make the interior detailing more authentic, and can be clearly seen through the roof windows.

Includes a separate workshop building that can be attached to the shed at any position or used free standing.

With lots of details: relief window lintels and sills. Beautifully printed red and blue brick.

• Area: 323 x 140 mm
• Workshop: 100 x 65mm.

To build the kit you need following:

• a modellers knife
• a pair of scissors
• a steel ruler
• glue (for example: UHU solvent free all purpose)
• a cutting surface
• fine point tweezers
• water colour paints and a fine brush

Metcalfe kits are printed in full colour on to 1mm thick card.

Ready cut and creased.

Fully illustrated step by step instructions.

A classic station building found all over England and the British Isles in the style of railway construction at the turn of the century.

ENGINE SHED AND HUT

Provide a home for your locos, giving them cover from the elements and a place for repairs and maintenance. It is normal to find a water tower and coaling stage nearby (see Ratio 540, 505, 506, 551 and Wills SS34 kits), and an Inspection Pit (Peco LK-56/156) was also often provided. Can be used as either a single or through shed. Multiple kits can be joined together if required. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 176mm x 90mm

• Length: 176mm
• Width: 90mm

• Ratio 00 range of Building and Accessory kits
• All 1:76 Scale Model Railways and Modelling projects