Category Product Lists

The most conventional overpass with stairs and escalators

Features

• Snap-in assembly kit (rubber adhesive is required for loose fitting parts)
• Can be installed in the hole created by removing the roof cover of the platform (urban type) or platform (modern type), in which case it can be used in conjunction with the underground escalator of the platform
• Can also be installed at the end of a platform that has no roof
• Compatible with wide platforms at the end of the platform. In that case, the width of the staircase can be expanded by 1.5 times
• Includes a passageway that spans three tracks
• Includes a support pillar to support the passageway when it is long
• Includes a raising part to raise the height of the platform (modern type) to match the height of the platform (urban type) when placing the platform (urban type) and platform (modern type) side by side to install an overpass
• Includes braille blocks and transfer guide display stickers for stairs, escalators, elevators
• Platform entrance runner A x1
• Platform entrance runner B x1
• Escalator runner x1
• Passageway floor runner x2
• Passageway wall runner x2
• Pillar runner x2
• Passageway roof runner x2
• Elevator/extension common roof runner x2
• Staircase roof runner x2
• Staircase glass runner x1
• Passageway wall glass runner x2

Expansion

• By rearranging the parts using two sets, you can assemble an overbridge with only stairs or an overbridge with only escalators.You can also assemble an overbridge with only stairs that is 1.5 times wider for the end of a wide platform, and an overbridge with stairs sandwiched between escalators.
• By using two sets, you can assemble one large overbridge with twice the width of the passageway that can accommodate the two holes left by removing the roof cover of a wide platform, and you can freely set the position of the escalator and stairs.
• The passageway can be extended with the separately sold multi-passage extension set.
• The passageway width can be widened with the separately sold multi-passage width expansion set.

The engine shed is an essential part of railway operations both in the modern era and in times of yore. Engine shed would be the places that engines would be steamed up in the mornings, and worked on should a fault develop with an engine. Every railway needed them and this is no different in 00 gauge.

Specification

• Item Length - Without Packaging (cm): 25
• Item Height - Without Packaging (cm): 15
• Item Width - Without Packaging (cm): 10
• Item Weight - Without Packaging: 0.25
• Item Scale: 1:76 Scale 00 Gauge
• Finish: Painted
• Colour: Multiple
• Gauge: OO
• Operator: GWR
• Designer: Hornby
• Number of Parts: 1

A beautifully designed LNWR signal box comes with lineside hut and fuel store shed.

Commonly found situated in an industrial environment or a goods yard in a station complex. Could be at the centre of a remote hub at the crossing between road and rail to transfer goods onto and off from the national railway. This kit is adaptable with platform repositionable to either side of the building. Rail entrance space for single track complete with internal platform detail.

You can recreate a station by combining it with the viaduct (sold separately).

Features

• Reproduces the stores adjacent to the ticket gates under the viaduct
• Width is 140mm, the same length as the straight rail S140
• Includes elevated station piers for use when creating a station with two or more levels
• Use in combination with the separately sold Multi Viaduct S140 (for opposing platforms) or Multi Viaduct S140-55.5
• Can be placed perpendicular to the rails using the included rotating coupling with the separately sold tiered elevated beam
• Can be expanded by combining with other separately sold elevated stations B or elevated station A
• Includes color stickers for stores, signs, plantings, etc.

Accessories

• Runner parts: signs for elevated stations, etc.
• Runner parts: piers for elevated stations
• Parts: roof end plates for elevated stations
• Parts: couplings
• Sticker: signs, etc.

Tomix Island Home Series.

Features

• One side of the platform end is sloped, and the other is straight
• All platforms are 140 mm long
• The platform roof is a mountain-shaped type
• Includes a wooden, tile-roofed waiting room
• In order to create the atmosphere of a local station, the platform height is set 2 mm lower than conventional platform products
• <4004>Includes an overbridge spacer so that a wooden overbridge can be used
• Various other station parts are included (tablet delivery unit, one-man compatible rearview mirror, utility pole with streetlight, trash can, water tap, station name plate, etc.)
• Local bridge platform (slope)
• Local island platform (waiting room)
• Local island platform (roofed)
• Local island platform
• Local bridge platform (end)
• Crossing parts runner
• Bench and other runner
• Station name plate and other runner
• Shop
• Stairs
• Overpass spacer
• Joiner
• Sticker

A Railway Station typical of those found in the south-eastern region of Britain. This is a high detail 00 scale resin model complete with fully painted finish.

Specifications

• Item Length - Without Packaging (cm): 12.1
• Item Height - Without Packaging (cm): 13.1
• Item Width - Without Packaging (cm): 16
• Item Scale: 1:76 Scale 00 Gauge
• Finish: Painted
• Colour: Multi
• Designer: South Eastern Railway
• Number of Parts: 1

This stone is ideal for custom building country walls and village buildings. Designed to match all Metcalfe kits using the Old Mill style stone such as the Ramshackle Workshop.

Specification

• 4 x sheets of thick card & 4 x sheets of thin card and 1 roof sheet, printed with our Old Mill style stone effect

• Size of each sheet 280 x 200mm

   

• Pack includes 1 sheet of roofing slates.

No train station is ever complete without a booking hall! If you are yet to add one into your layout then this is just the one waiting to be brought home today. Why not add some people figurines into the scene to bring this bustling booking stall to life? Includes one straight platform section, approach steps with fence, platform accessories and alternative signage transfers. The upper gable and chimneys can be repositioned to change the architecture.

Specification

• Item Length - Without Packaging (cm): 17
• Item Height - Without Packaging (cm): 15.5
• Item Width - Without Packaging (cm): 12
• Item Weight - Without Packaging: 0.21
• Item Scale: 1:76 Scale 00 Gauge
• License: No
• Finish: Painted
• Colour: Brown
• Gauge: OO
• Operator: Hornby
• Designer: Hornby
• Number of Parts: 1
• Motor: 5 pole skew wound

If you are seeking to extend your train station then the Hornby platform ramps x 2 pack is just the ticket!At a length of 121mm and featuring a red brickwork and pavement detailing, what's not to love about this platform pack?

Specifications

• Item Length - Without Packaging (cm): 12.1
• Item Height - Without Packaging (cm): 2
• Item Width - Without Packaging (cm): 6.8
• Item Weight - Without Packaging: 0.21
• Item Scale: 1:76 Scale 00 Gauge