Category Product Lists

We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!) - until we saw the Version 2.0 - and here it is now in the long-awaited Titans colour scheme! Newly-designed joints allow it incredibly realistic posing, especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for ""action"" poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! The kit is all moluded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!

Contents

• Plastic sprue, Decalsheet (dry), Decalsheet (stickers)

This gorgeous Master Grade kit of the Strike Gundam with the Aile Striker features Bandai's super-poseable "inner frame" system, which you build up before adding the armor. This inner frame allows you to pose the completed kit in all kinds of realistic positions, with much more freedom than you get with regular kits (even with regular Master Grades!). Comes with parts for the display base, too, and a 1/100-scale figure of Kira Yamato.

Part of Bandai's MG Clear Parts Campaign in celebration of the 30th anniversary of Gunpla, this reissue of MG RX-77-2 Guncannon come with optional clear armor parts for the sections shown in the photos below. The clear armor parts come molded on one plastic runner. Everything else remains the same as its initial release.

This MG kit of Guncannon comes in snap-fit plastic parts molded in color and will be fully poseable with polycapped joints upon completion. Its highly-detailed inner mechanical frame is incredibly articulated to allow for recreating various scenes from the anime series. Its signature 240mm shoulder cannons can be replaced with the included spray missile launchers. The Core Fighter can also transform into a core block to act as the cockpit for the Mobile Suit. The compartments on its legs can be opened for storing its hand grenades. Includes a beam rifle, optional hands, and marking stickers for adding detail to the completed model. Includes exploded-view pictorial-type instructions, with notes in Japanese.

Item Size/Weight: 31 x 20 x 11.2 cm / 640g

The GM Command (Colony Type) from "Mobile Suit Gundam 0080: War in the Pocket" gets a Master Grade kit from Bandai!

Features

• It features the backpack used in Colony type GM Command mobile suits, which has been newly molded for this kit.
• It comes armed with the Bullpup Machine Gun, two Beam Sabers, a shield, and two magazines.
• Stickers and marking seals are also included.

Includes

• Bullpup Machine Gun
• Beam Saber (x2)
• Shield
• Magazine (x2)

The Core Booster stands on its own and can also combine with the 1/100 MG Victory Gundam to make the V Dash Gundam!

The Core Booster kit comes with two core fighters - V Gundam or Hexa, and includes Missile Pods, a Disposable Bazooka, Beam Rifle, Beam Cannon, Beam Smartgun, Beam Javelin and a Gatling Gun. The weapons are also useable by the Victory Gundam. A stand is also included.

Item Size/Weight: 31 x 20.2 x 9.4 cm / 480g

Introduced in the "Mobile Suit Variations" series, the MS-06F Zaku II Minelayer variant of the standard space-type MS-06F Zaku II is now offered as this excellent Master Grade kit!

Features

• To perform its mine-laying duties, the mass MS-06F Zaku II is outfitted with a minelayer randsel that houses two removable cartridges of mine pods.
• Intricate mechanical detailing throughout, from the inner mechanics of the randsel to the fully articulated inner body frame.
• Armaments include a Zaku machine gun, heat hawk, and a Zaku bazooka.
• The snap-fit kit comes molded in color and does not require any cement or paint to complete (of course, the use of paint will improve the appearance of a finished model).
• Dry-transfer decals and stickers are provided for markings.
• Two types of blade antennas are included in case you plan on building a commander-type Zaku minelayer, and two pilot figures are also provided to man the Mobile Suit.

Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show).

This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project.
Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield.

All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work.

Contents

• Plastic sprue, Decalsheet (dry), Decalsheet (stickers)

An amazingly detailed snap-together kit molded in color so painting is not necessary. Does not include display stand.

Bandai's well-received MG Exia (linked below) from Gundam OO, is here in its Trans Am colors for this edition!

Please note that this kit does not include the "repair parts" to build the battle-damaged Gundam Exia as found in the Ignition Mode version.

Features

• The popular machine comes sharply molded in color and incredibly flexible upon completion.
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release.
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath.
• Its complete Seven Sword System are provided that consists of a GN Long Blade, a GN Short Blade, two GN Beam Daggers, two GN Beam Sabers, a GN Sword that can switch between rifle mode and gun mode, plus a GN Shield with sides that can slide out.
• A dedicated clear base is also included for displaying the detachable GN Drive, and a red cover part can be attached to the back of Gundam Exia in place of the GN Drive.
• Two same-scale figures of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail.
• Four button batteries are required, not included.

MG 1/100 Wing Gundam

Features

• Bandai uses its inner frame construction technology to bring this MG to life.
• The neck features dual joints to allow a variety of poses and poly-caps are used throughout.
• Buster Rifle, Shield, and two Beam Sabers are included.
• Wing Gundam can easily transform between Robot and Bird Modes.
• Marking stickers, dry transfers, and foil stickers included.

Everything you'd expect from a Master Grade kit -- superb detail, lots of moving parts, and lots of weapons -- in the colours from the Playstation 2 video game "One Year War 0079". Even the fingers are individually-jointed! I'm partial to Doms, though (love those big feet!). All the parts are molded in colour and snap together so no paint or glue are required; Gundam stickers and dry-transfer decals are included for markings.

Item Size/Weight: 30.8 x 39 x 10.8 cm / 870g

A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka. Over 100 pieces, plus polycaps and clear "Gundam Stickers" with various in-scale warnings and markings on them; everything is molded in color and snaps together for ease of assembly. Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (you get figures of two standing mechanics and a seated pilot, too)

Contents

• Plastic sprue, Decalsheet (dry), Decalsheet (stickers)