Category Product Lists

Master Grade gunpla of the Shin Musha Gundam.

This is a 1/100 scale snap-fit model kit requiring assembly. Glue is not needed and the parts are molded in color.

It comes with four weapons: Nichirinmaru Katana, Denkoumaru Naginata, Sankoumaru Jumonji Yari and Tanegashima Gun.

Part of Bandai's MG Clear Parts Campaign in celebration of the 30th anniversary of Gunpla, this reissue of MG MS-07B-3 Gouf Custom comes with optional clear armor parts for the sections shown in the photos below. The clear armor parts come molded on one plastic runner. Everything else remains the same as its initial release.

A close support version of the MS-07B which includes Heat Saber, Heat Rod, hand Gatling, and that awesome gattling gun/shield assembly. (Can someone explain how it stays standing, firing that thing?) Extra hands and a figure of Pilot Norris Packard are included.

Item Size/Weight: 31.2 x 20.2 x 12.2 cm / 680g

This Master Grade model kit of the Sinanju Stein, as seen in "Mobile Suit Gundam Narrative," features an updated design!

The engraving on the Sleeves emblem is divided into parts for ease of assembly; the beam axe can be connected and equipped as a long-beam naginata, and the beam parts can also be deployed while attached to the shield. Emotion Manipulator SP is used for the hand parts, and each finger can move independently! The flexible leg thrusters can be moved independently with their lift arms; the cockpit can open and close, and the vertical movement of the chest block can also be reproduced. Two figures of Zoltan Akkanen are included: sitting and standing.

Includes

• Shield
• High beam rifle
• Grenade launcher
• Beam axe (x2)
• Bazooka
• Beam saber (x2)
• Effect parts (x1 set)
• Interchangeable hands (x1 set)
• Figures (x2)
• Joint parts (x1 set)
• Stickers

The primary mobile suit used by the series' protagonist Heero Yuy; the XXXG-00W0 Wing Gundam Proto Zero is a transformable mobile suit featured in the latter half of the Gundam Wing series.

Features

• Its' stand out features are the ability to transform into neo bird mode as well wielding a pair of extremely powerful buster rifles.
• This design variant comes from the manga retelling of the original 1995 anime.
• The EW line also features the Wing Gundam, Deathscythe, Deathcythe Hell, Heavyarms, Sandrock, Shenlong, Epyon and Tallegeese.

Featuring the version 2.0 frame designed by Bandai, the kit also comes with a gimmicky beam sabre that will light up with an LED (powered by a watch-type battery, not included), plus the shield, hide bomb, and all the other Gyan armament -- including a 1/20 scale unpainted figure of M'Quve.

Bandai MG 851833 GUNDAM Build Strike Gundam Full Package Gat-X105B/FP 1/100 scale kit

This highly detailed and articulated snap-fit kit is molded in multiple colors, with stickers for decoration. Comes with a display stand!

Item Size/Weight: 39 x 31 x 9.3 cm / 910g

The original version of the Zaku as seen early in the original Gundam TV series, is now available as a top-quality Master Grade kit. Gundam kit fans don't need to be told about the details of these kits any more -- Bandai's engineering excellence and attention to detail are well-known. But for those who are not, let it suffice to say that everything on the finished kit moves, it's molded in color and snaps together, and there's an amazing amount of detail, especially under the outer armor panels. Three types of hands are included, as are four different weapons (two guns, a bazooka and the "heat hawk" axe), plus a shoulder-mounted spike shield. Like all Master Grade kits, it's highly recommended. Available in the "Black Trinity" version as well.

From "Gundam 00" Bandai brings us their newest MG Gundam Kyrios Gunpla kit!

This kit features a special stability for excellent balance, and the hand parts can be bent inward while holding the wireless grip in MA mode for unique and special handiwork. The GN beam submachine gun can connect to the arm joint and is fully replaceable. A wireless grip can be connected to two weapons, creating a set, and the shield can enter different modes.

Includes

• GN Beam Submachine Gun
• GN Hand Missile Unit x2
• Wireless Grip x2
• GN Beam Saber x2
• GN Shield
• Foil sticker
• Marking sticker
• PP Sheet

The Psycho Frame test machine Narrative Gundam C-Packs from "Mobile Suit Gundam Narrative" is the subject of this Master Grade Ver. Ka model kit from Bandai!

It's equipped with a number of gimmicks created by Hajime Katoki. The thickness of the clear parts of the Psycho Frame are adjusted, with details engraved on the front, back and sides for a deep, three-dimensional shape. Depending on the angle it's viewed from, it reflects light like a crystal! A gray Psycho Frame that does not activate NT-D is included, and can be used selectively. The hip joints are movable for each block, and the fins on the back of the knees sink as the knees move, so the legs can be bent deeply without interference. It can be transformed from core block from to a bird-like core fighter by rotating the nose, and it comes with a C-equipped beam rifle that's an improved version of the Jegan rifle; you can reproduce both types with parts replacement. Two figures of Jona Bashta are included: sitting and standing.

Includes

• Shield
• Beam rifle
• Beam rifle reproduction parts for Jegan (x1 set)
• Beam saber (x2)
• Body reproduction parts (x1 set)
• Landing gear parts for Core Fighter (x1 set)
• Hand parts (x1 set)
• Figures (x2)
• Psycho Frame parts for when NT-D is not activated (x1 set)
• 3D metallic stickers
• Waterslide decals

From "After War Gundam X," it's the mighty Gundam Double X!

It has common parts between the internal frame and reflector units of the Gundam X. The Twin Satellite Cannons can be deployed with their reflector panels out, and the internal reflector panels have a mirrored frame similar to that of the Gundam X. The cannon can expand and change its angle for various attacks, and there's a locking mechanism on the shoulder for better stability. In addition, the forearms and calves also feature reflector expansion. Comes with its shield, Buster Rifle, two Twin Satellite Cannons, two Hyper Beam Swords, and in-scale figures of Garrod Ran and Tiffa Adill.

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

There are 17 runners of parts here. Even if you don't paint or glue this kit (naturally it's all snap-assembly), it's going to take a few hours to put it together properly.

As usual, everything on the kit moves. Fully-posable at all joints; extensive internal detail; individually-posable finger joints; numerous weapons, including the beam saber, 2 Giant Baz bazookas, Sturm Faust with an extra round, shot gun with detachable shoulder stock and the chain mine (ouch!). Most of these mount right on the mechs back or hips for firing and/or storage. Of course, the kit is also molded in color, and features snap assembly.

Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, and stuff I've probably overlooked.

The RX-78-3 G-3 Gundam that appeared in Mobile Suit Gundam joins the 1/100 scale Master Grade model kit series!

Features

• 1/100 Scale
• Made of PS, PE, ABS, and PVC
• Part of the Master Grade model kit line
• From Mobile Suit Gundam
• Includes pieces to build its iconic weaponry
• Instructions may or may not include English translation

Contents

• RX-78-3 G3 Gundam
• Core Fighter
• Beam Rifle
• Shield
• Hyper Bazooka
• 2 Beam Sabers