Category Product Lists

The Effects range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour and Spray! (NOTE: For best results with this paint, please use over a light coloured base such as PL02 White. Glow effect gained by exposing painted pieces to strong light source and then displayed in dark or low light situations)

The Premium range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour & Spray!

This is a base paint used when you want to turn a dark base color such as black or red into white. The newly developed special paint strongly conceals the base color, gives a fine finish, and helps the top coat color to develop. It also has a surfacer effect, so it can handle minor scratches.

The basic label. The orange dot is the element that remarks a range of colors designed for any kind of modeler. The clear and easily identifiable label includes the name of the color and its reference code at the top.

Comes in 17ml bottles.

Mr Color hobby paint is a paint that has long been regarded highly by modelers world wide as a model paint that delivers an outstanding finish. There are a large number of colours and colour types available, which are suitable for painting almost all models. Generally, Mr Color provides a wider range of paint colours and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

When applying Mr Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.

If airbrushing Mr Color paint, it should be thinned after diluting to a ratio of between 1 (Mr Color) and 1 to 2 Thinner, depending on the degree of paint viscosity required.

Gloss levels obtained using gloss coat Mr Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING
1 : 0.8~1.0
(Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

1 : 1~2
(Mr. COLOR : Mr. COLOR THINNER)
Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

• Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
• Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
• CHOOSE AN APPROPRIATE THINNER
• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
  LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.