Category Product Lists

A set of 3rd Generation acrylic paints including the four camouflage colors which were used for painting all Luftwaffe front line aircraft from 1936 onwards.

Although the tri-color upper surface camouflage pattern consisting of RLM 61, 62 and 63, was officially replaced with the RLM 70/71 scheme in late 1937, many aircraft retained the former camouflage during the first campaigns of the World War II.

The colors provided with this set are also useful for painting models of several German aircraft used by the Legion Condor during the Spanish Civil War, including many of those that were handed over to the newly-born Spanish Air Force after the end of hostilities.

Contains

• AK11814 RLM 61
• AK11815 RLM 62
• AK11816 RLM 63
• AK11817 RLM 65 (1938)

Tamiya Color Acrylic Paints are made from water-soluble acrylic resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. These Tamiya Color Acrylic Paint products contain 23ml of paint. It is recommended to use Tamiya acrylic thinners for thinning paints for use with an airbrush.

Colours may vary slightly from Tamiya Color Lacquers, Enamels and Spray Paints with the same name.

Mr. COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. A wide range of colours are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colours and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING.

THINNING RATIO for Mr. COLOR

BRUSH PAINTING

• 1 : 0.8~1.0
• (Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING

• 1 : 1~2
• (Mr. COLOR : Mr. COLOR THINNER)
• Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.

Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER

• Mr. COLOR THINNER: The most basic thinner for Mr. COLOR
• Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
• Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING

CAN BE MIXED WITH

• Mr. COLOR
• Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
• Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
• LASCIVUS

CANNOT BE MIXED WITH

• AQUEOUS HOBBY COLOR
• ACRYSION, ACRYSION BASE COLORS
• CLASSY 'N DRESSY COLORS
• Mr. METAL COLOR

AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.

Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR

Apply 1 to 2 coats if painting with a paint brush, or 2 to 3 coats if airbrushing.
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

• Use T114 Mr. Paint Remover to remove paint from a surface.
• Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
• Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
• Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
• Do a test paint before you apply paint on your model kit.

ATTENTION

• Put the lid back on after use.
• Store in a cool and ventilated place, away from direct sunlight.
• Use in a well ventilated area.

Updated Bottle - Now 18ml!!!

We have introduced a new formulation that will surprise you with its amazing brushability, excellent opacity and superb matt finish.

You will notice that the colors dry quickly, forming a homogeneous and self-leveling layer that respects the smallest detail present in your model. In fact, we recommend applying them on a previously primed surface.

Packaging: Model Color is presented in bottles of 18 ml/0.6 fl oz with eyedropper. This packaging prevents the paint from evaporating and drying in the container, so that It can be used in minimal quantities and preserved for a long time.

The Premium range of lacquer model paints are specifically formulated for air brushing straight out of the bottle. With a denser pigment compared to a lot of other model paints, expert results can be gained with minimal effort - just Pour & Spray!

Aqueous Hobby Color is a paint line newly reformulated in 2020 and aimed to be a safer paint with a higher degree of user friendliness.

Aqueous Hobby Color paint is water based, which means you will never run out of thinner/reducer – you can use regular water. Tool cleanup is also easier as you can use water.

Aqueous Hobby Color paint does contain a mild solvent in it which helps a lot with the adhesion.

Leveling capabilities of this paint are high, it provides a glossy finish with a light texture, creating an excellent paint finish.

Gloss levels of the Aqueous paint can be adjusted using additives

• H-40 Flat Base can be mixed with any color and make the paint semi-gloss or even matte/flat. Mix ratio between 5% and 10% is recommended.
• Mr. Aqueous Hobby Colors are ready for a regular brush application. They are also airbrush friendly; however, it is recommended to reduce it before use with an airbrush. As we mentioned earlier, regular water can be used as a reducer, but for the best result we recommend using Mr. Aqueous Hobby Color Thinner (T-110 or T-111).
• Up to 150% of the reducer can be added to Aqueous paint for airbrush use.
• When spraying paints with an airbrush, 2-3 coats are recommended.
  For regular brush use 1-2 coats is enough.
• If painting a light color over a darker base surface, more layers of paint may be required.