Category Product Lists

Zap PT07-A-Gap 2oz Cyanoacrylic (Pink) Super Thin Fast Drying

• Superior penetrating formula
• Super thin - water like consistency
• Bonds and cures in 1 to 5 seconds
• Works on most materials

ICKYSTICKY Thin CA is a thin, quick-setting, penetrating formula that bonds through oily or dirty surfaces.

This product works best on:

• China
• Aluminium
• Pottery
• Fibreglass
• Rubber
• Resin
• Wood
• Metal

Features

• Superior Penetrating Formula
• Thin Viscosity
• Bonds And Cures In 1 To 5 Seconds
• Works On Most Materials
• Excellent Wicking Action
• Pin Cap To Prevent Nozzle Clogging.

Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason, you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal's film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so a not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases but, if necessary, a second application of Micro Sol can be helpful.

This is a 2 oz aerosol can of Zip Kicker accelerator from Pacer Technologies. Best working accelerator for ZAP and all other super glues you'll find! Sets in just a few seconds. 2-oz aerosol can.

Bob Smith Industries Super-Gold+™ 

• Odorless Foam-Safe CA 
• 3/4 Oz 
• #BSI139

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.