
Proses TC-003-4-S Spare Pads for TC-003 and TC-004
Spare pads for TC-003 Wet & Track Cleaner Stick and TC-004 Wet & Dry Track Cleaner Car
Specifications
Product Dimensions: 1 x 4 x 1 cm

Hornby R8223 Extension Track Pack C (OO Gauge)
Extend your set in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet. Add Extension Pack C to the Starter Oval plus Extension Packs A and B to make this layout.Track Extension Pack C. Having created a second complete oval using Trackpack C, you can run two trains independentlyYou will also need to add a second Train Controller to operate this second oval. We recommend making the step up to the R8012 HM2000 Twin track Controller - giving smooth, responsive control over two separate circuits.
Contents
- 2x Straight track (R600)
- 1x 2nd radius curve track (R606)
- 4x Double curve 2nd radius track (R607)
- 1x Right hand point (R8073)

Tomix 1782 N Easement Wide PC Curve Track 12-1/2" Radius 22.5°
This is a wide curve cant introduction rail with a radius of 317 mm, a curve angle of 22.5°, and a width of 37 mm. A rail that is gradually canted from a flat surface with no cant to a cant rail where the rail on the outside of the curve is higher than the rail on the inside.
Features
- Ballast and sleepers are painted for a beautiful appearance
- Precast sleepers
- Rails are joined with claws for an easy and secure connection
- Compatible with conventional TOMIX rails
- Separately sold handrails, side walls, and fences can be attached to the sides of the rail
- Single-track pier base (sold separately) can be attached to the underside to support single-track piers
- Can be used as a double-track rail by connecting the separately sold CR(L)280-22.5-WP to the inside, or the separately sold CR(L)354-22.5-WP to the outside
- When used as a double-track rail, a wide rail cant coupling (wide rail/slab rail coupling for flat introductions) can be attached to the underside to support double-track viaduct piers
- Power can be supplied by attaching a wide rail/slab rail feeder to the underside (slab rail feeder can also be installed, conventional feeders cannot be installed)
- Wide rail/slab rail sensor can be installed by user additional work (slab rail sensor and one-touch attachment sensor cannot be installed)
- Compatible with mounting to various overhead poles
- The cant angle changes gradually from 0 degrees to approximately 4 degrees with a curve angle of 22.5 degrees
- 2 sets of 2 each of CR, which gradually cants as it curves to the right, and CL, which gradually cants as it curves to the left

Tracksetta NT36 N/OO-9 36 inch 915mm Radius Template
With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well laid track is essential for reliable running.
Specifications
- Radius: 914mm
- All PECO N and 009 Streamline Flexible track systems

Tracksetta NT30 N/OO-9 30 inch 762mm Radius Template
With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well laid track is essential for reliable running.
Specifications
- Radius: 762mm
- All PECO N and 009 Streamline Flexible track systems

Tomix 3280 N 3280 Single Overhead Line Pole for SHINKANSEN 24pcs. Set
This is a tall type of single-line overhead line pole used for the Shinkansen.
Features
- The bracket part comes in two shapes, pipe type and conventional type, and both the pipe type and conventional type brackets reproduce the long and short shapes.
- A total of 24 pieces in the set: pipe type A x 6, pipe type B x 6, conventional type A x 6, conventional type B x 6
- Can also be used as a double-line overhead line pole
- Includes a truss that connects the top of the left and right overhead line poles, which can only be used when assembled with double lines
- Includes an overhead line pole fixing base that uses the rail feeder insertion port
- Includes a conventional fixing base for mounting to the rail trackbed
- Can be installed on separately sold wide rails and viaducts
- Runner parts: Fixed base runner