Category Product Lists

This is a rail set that allows you to easily recreate a locomotive depot.

Features

• Includes parts to recreate a locomotive depot, such as a double-track engine shed, pantograph inspection stand, and fuel tanker
• Newly manufactured rails for the interior of the depot
• Rails can be easily and securely connected
• The pantograph inspection stand and fuel tanker are included, allowing you to recreate an inspection and repair depot for electric and diesel locomotives
• By adding the separately sold engine shed rail extension, it can also accommodate long trains and diesel railcars
• The roof of the double-track engine shed is a different deep green color to <4212>
• Includes a multi-double-track truss overhead line pole
• The points rail is a synthetic sleeper type, manually operated
• The points rail can be electrified by installing the separately sold <0107> Point N drive unit (F)
• The signs on the end rails do not light up 

Contents

Rails

• Straight PC rail S70-PC(F) x 2
• Straight PC rail S72.5-PC(F) x 3
• Straight PC rail S140-PC(F) x 5
• Straight PC rail S280-PC(F) x 2
• Curved PC rail C280-15-PC(F) x 1
• Curved PC rail C541-15-PC(F) x 1
• Manual composite sleeper point N-PR541-15-SY(F) x 1
• Manual composite sleeper point N-PL541-15-SY(F) x 3
• Safety siding rail x 1 set
• End PC rail E-PC(dummy)(F) x 4
• Garage rail S175-PT(F) x 2
• Crossing PC rail S35-PC(F) x 2
• Wide tram rail S140-WT(F) x 2

Accessories

• Runner parts: Dummy point motor
• Runner parts: Dummy point switching machine base
• Runner parts: In-yard crossing runner
• Runner parts: Inspection platform floor
• Runner parts: Inspection platform handrail
• Runner parts: Inspection platform support
• Runner parts: Inspection platform base
• Runner parts: Engine shed floor
• Runner parts: Fuel tanker base, etc.
• Runner parts: Equipment box
• Runner parts: Wheel shape measuring device, etc.
• Runner parts: Tramrail parts, etc.
• Runner parts: Safety siding parts
• Runner parts: Multi-double track truss overhead line pole
• Runner parts: Single track overhead line pole
• Runner parts: Terminal overhead line pole
• Runner parts: Wide tramrail/road common joint
• Parts: Double track engine shed
• Stickers: Display, etc. 

This is a rail set for creating sidings with fully selective electric points.

Features

• The rail layout is based on the island platform, with the single track branching off into double tracks with 55.5mm spacing for stations, and then turning back into a single track again.
• Product number <91062> Rail set siding set (rail pattern B) will be discontinued.

Rails

• Straight rail S140 (F)
• Straight rail S280 (F)
• Straight rail S72.5 (F)
• Curved rail C541-15 (F)
• Electric point N-PR541-15 (F) (fully selectable)
• Electric point N-PL541-15 (F) (fully selectable)

Control equipment

• Point control box NS
• Point control box NW

Accessories

• Dummy point motor runner
• Point control box seal

The Hornby long straight track has a length of 670mm, a black painted finish and is the perfect choice for those just beginning their railway layout.

Specifications

• Item Length - Without Packaging (cm): 67
• Item Height - Without Packaging (cm): 0.4
• Item Width - Without Packaging (cm): 2.9
• Item Weight - Without Packaging: 0.05
• Item Scale: 1:76 Scale 00 Gauge

This is the basic horizontal pier for converting a double track system into an elevated line.

Features

• Compatible with double-track slab rails and double-tracked wide PC rails
• Cannot be used with single-track viaduct systems due to rail thickness
• Couplings compatible with double-track rails (PC sleepers) are included
• Couplings compatible with double-track slab rails and wide PC rails are sold separately

This set includes a cleaning car that uses a motor built into the car to rotate a disk to clean the rails, and a towing locomotive.

Features

• Specially painted cleaning car and towing locomotive
• The towing locomotive does not have an intermediate bogie and is easy to handle

Cleaning car

• Original color of the set
• Easy to handle by connecting with the ED61 (towing car) in the set and operating it, you can easily clean hard-to-reach areas in the layout.
• The cleaning fan powerfully sucks up dust and dirt on the tracksThe suction fan sucks up fine dust on the rails and the collected dust can be easily disposed of.
• Almighty use is possible if you replace the suction fan with a disk, you can clean the top of the rails.When the dirt is severe, use the dry type, and otherwise use the wet type.The wet type can be used in conjunction with the separately sold <6401> rail cleaner to improve the cleaning effect.In addition, the car body has a built-in cleaner liquid tank.
• Power supply mode can be selected with the mode switch. The small switch on the front of the car body can be switched between "CL-POWER (power mode: when using the constantly lit (CL) type power unit N, the disc can be rotated at high speed regardless of the speed of the towing vehicle), "ON (normal mode: the disc rotates according to the speed of the towing vehicle)" and "OFF." It also has a built-in safety circuit that cuts off the electricity in the event of an abnormality.

ED61

• The towing locomotive is set in the original red color of the ED61
• Equipped with flywheel power
• Headlights light up
• Number and maker's plate included
• Handrails and signal flares integrated
• Equipped with M coupler

PECO STREAMLINE OO/HO CODE 83- FLEXIBLE TRACK, WOODEN SLEEPER

83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.

Specifications

• Length: 914mm

Recommended to be used with

• SL-110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
• SL-111 Insulated Rail Joiners for PECO Code 83 track
• SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork

Note: This is a Bulk Pack of 25

This is a curved rail with a radius of 605 mm and a curve angle of 10°.

Features

• Ballast and sleepers are painted for a beautiful appearance
• Wooden sleepers are recreated
• Rails are joined with claws for an easy and secure connection
• Compatible with conventional TOMIX rails

Features

• This is the most basic modern type of island platform.
  
• It is made up of four blocks, and the blocks are connected with one-touch joiners.
  
• The clock, speakers, etc. are reproduced as separate parts
  
• Stickers for station names and advertising boards are included.
  
• It can be extended using the extension part (sold separately).

Details

• Curved end platform R
  
• Unroofed platform 140mm
  
• Roofed platform 280mm
  
• Curved end platform L
  
• Runner parts: benches, ashtrays, station signs, etc.
  
• Parts: platform light, shops, stairs
  
• Parts: joiners
  
• Stickers

Replacement cleaning head for use with multi-wheel cleaning rails.

Features

• Replacement cleaning head for use with multi-wheel cleaning rails
• Set includes 4 dry (sandpaper) heads and 12 wet (special paper) heads
• Wet heads are most effective when used with a small amount of the separately sold rail cleaner