Category Product Lists

The 90° corner – a special challenge

If you want to drive through the 90° section undamaged, you should definitely reduce your speed beforehand. Otherwise, the race car will land safely outside the race track or in a net or on a tyre pile attached to the lane. The same applies to your slot car on your Carrera race track. Brake your car before the corner, hit the apex and then accelerate your car out of the corner. This set contains two 1/90° corners. Both the length and the width of the track is 228 mm and come on a scale of 1:43. You can use the pieces for the Carrera DIGITAL 143, Carrera GO!!! and the Carrera GO!!! Plus. With these corners, you’ll be sure to bring action to every race.

This accessory is compatible with the following systems :

• Carrera GO!!!
• Carrera DIGITAL 143

 Radius 2 Curve Outer Borders 22.5 degree x 4, to extend your existing track and take your racing to the next level!

Shown with C8280 Radius 2 Inner Borders 22.5° and C8234 Radius 2 Curve 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.

One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Prepare. Attention. Now!

Start endless hours of fun on the Carrera track with this GO!!! Straight Track 34cm accessory. This practical accessory is fully compatible with Carrera GO and Carrera Digital 143 . The accessory is designed to expand the track for even more fun. In this practical package you will find 2 pieces of straight. Precise design and high-quality durable materials are the Carrera car tracks.

This accessory is compatible with the following systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Individual driving fun with the digital track extension set

Something new in store for sure! Even if you are always working on improving your lap time with the familiar and beloved slot car circuit, you will eventually feel the need for more variety. And that's exactly what this digital track extension set is for. With four standard straight sections, a left lane change, a double lane change track, track locking mechanisms and a lane change corner, new track elements can be added to the Carrera DIGITAL 124 and Carrera DIGITAL 132 race tracks. The tracks come on a scale of 1:24 and are ideally suited to the two race tracks mentioned above. The lane changes ensure rapid switching action and give you the opportunity to overtake the opponent's car imaginatively, especially during chases. Meanwhile, the straight sections extend your driving fun and help to expand the circuit. Info: This digital extension set can be used for upgrading.

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Track extension set for your Carrera race tracks
• DIGITAL 124, DIGITAL 132
• For expanding your race track
• Package contents: 4 standard straight sections, 1 lane change (left), 1 double lane change, 1 lane change corner (right, from outside to inside)

• Track set with corners and standard straight sections
• DIGITAL 124, DIGITAL 132, EVOLUTION
• To expand your race track
• Package contents: 2 pieces – standard straight sections, 4 pieces – corners 1 / 30 degrees

For the expansion of your Carrera race track and even more driving fun

Would you like to expand your Carrera DIGITAL 124, DIGITAL 132 or EVOLUTION race track and add some variety to your races? With this great extension set you can extend your Carrera race track to include great new features without any hassle. The set includes two standard straight sections as well as four corners and the corresponding track locking mechanisms. The tracks on a scale of 1:24 can be easily assembled and attached to your existing race track. Create your own individual Carrera race track and discover new possibilities and track elements to make your track even more exciting and expand it.

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Used for connecting multi-lane layouts together for added rigidity.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Contents

• x25 Metal Clips for Multilane

Allows the creation of alternative track routes, for example a single lane rally extension track to a current layout, or converts 2 lanes into 1 lane or converts 2 lanes in to 3 lanes or more. There is no limit to the amount of additional lanes you can add.

Total length of the two tracks : 138 cm (4 Standard Straight).

Carrera DIGITAL 30351 Narrow Right also available.

This accessory is compatible with the following systems

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Decorative components and protection for your slot cars

If you extend your Carrera track to include the outside curbs, you not only give the track a more authentic look, but also make sure your slot cars don't fly off the track so quickly if you've overdone the accelerator a bit. The set consists of eight parts and can be easily attached to steep corners of 2/30°. On a scale of 1:24, the outside curbs are suitable for the Carrera DIGITAL 124, DIGITAL 132 or EVOLUTION race track. If you expand your race track with the outside curbs, this not only enhances your track visually, but also provides some extra grip for your slot cars in the corner. So you can drift better around the corners and pass them all at full speed.

• Curb for steep corners
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For decorating the race track
• Package contents: 6 pieces

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.

One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

This pair of Scalextric digital pit lane track sections are the ideal tool to create pit lanes for your digital layouts. This pack also allows the creation of alternative track routes such as a single lane rally extension track to a current layout, converting 2 lanes into 1 lane or 2 lanes in to 3 lanes to name just a few! There is simply no limit to the amount of additional lanes you can add. The C7015 right hand pit lane track is also now available. Contents: left-hand pit in and pit out track sections with borders. Alternative pictures are track layout suggestions only.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: No

• Track Pieces Included: 1

Carrera 20604 Outside Shoulders for Chicane

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132
• Carrera Evolution

Contents

• 3 shoulders with 2 end pieces.