Category Product Lists

Radius 4 Curve Inner Borders 22.5 degree x 4, to give your layout that extra touch of variation and excitement!

Shown with C8235 Radius 4 Curve 22.5° and C8238 Radius 4 Outer Borders 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts. Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Give your race track that certain something

With this track section you bring variety and action to your race track! Put the pedal to the metal and let your slot cars race over the crossing at lightening speed. The bridge helps to create an even more exciting and authentic race track. There are almost no limits when constructing your race track. How about a lane change corner after the intersection or a chicane and narrow section? The track element consists of four track sections and eight track supports. Available on a scale of 1:24, the tracks are ideally suited to the Carrera DIGITAL 124, DIGITAL 132 and EVOLUTION race tracks. Just let your creativity run wild and create your very own individual Carrera race track that will captivate you and your friends every time!

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Cool track element for your Carrera race track
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For more variety on your race track
• Package contents: 1 piece (2 pieces – convex rails, 2 pieces – concave rails, 8 pieces – supports)

Contains Radius 2 Curve 45 degree x 2. Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with: C8225 Radius 2 Inner Borders 45° and C8228 Radius 2 Curve Outer Borders 45° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

Carrera GO!!! 61658 Straight 100mm/114mm (6 pcs)

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• Straights 100 mm x3
• Straights 114 mm x3

Worry-free, full power drifting!

Sometimes with the large slot cars on a scale of 1:24 you may find that they slip off the road in the corners when drifting. That can weigh heavy on the nerves in exciting head-to-head races. To counteract this, you can extend your race tracks with this extension set. This set contains the outside curbs for the 3/30° corner. Altogether, there are six curbs which can be assembled to form a 180° corner. Two end sections complete the outside curb. The scale of 1:24 also indicates the scale of the race track on which they can be built. These outside curbs are therefore suitable for Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION race tracks.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension set – outside curbs on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• Accessories for your race track
• Package contents: 6 pieces

Allows the creation of alternative track routes, for example a single lane rally extension track to a current layout, or converts 2 lanes into 1 lane or converts 2 lanes in to 3 lanes or more. There is no limit to the amount of additional lanes you can add.

Total length of the two tracks : 138 cm (4 Standard Straight).

Carrera DIGITAL 30350 Narrow Left also available.

This accessory is compatible with the following systems

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Prepare for full impact racing!

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• 90° Straight Crossover

Extending your Scalextric layout has never been easier!

The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Features

• 'One size fits all' concept

• Compatible with Digital and Standard sets

• Fits any sized layout

Contents

• 1 x Leap (Ramp up and down)

• 2 x Standard Straight Track

• 2 x Hairpin Curves

• 2 x Quarter Straight Track

• 4 x Side Swipes

• Borders and Barriers

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 8

Use the corner and overtake your opponent

This left corner is made for overtaking and changing lanes! Use it to your advantage and overtake your opponent with precision skill in this corner. Your opponent is then forced to follow you until the next opportunity for overtaking presents itself. The track change corner consists of two track parts and offers the possibility to overtake from the outside to the inside lane. The tracks are on a scale of 1:24 and can be used for digital race tracks such as the Carrera DIGITAL 124, Carrera DIGITAL 132 and the digitally upgraded Carrera EVOLUTION. This extension set brings extra fun to your race track.

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Track extension lane change left corner on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• Digital lane changing and overtaking
• Package contents: 1x lane change corner – left, outside to inside (2 track parts)

Prepare for full impact racing!

Contains 90° Straight Crossover 409mm Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 1