Category Product Lists

Carrera GO!!! 61617 Radius 2 Curve 45° (4 pcs)

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• Radius 2 Curve 45° x4
• Guard rail and supports

The classic expansion for your Carrera race track

You should always have enough standard straight sections in reserve. They are the perfect elements to expand your Carrera race track and can be used in many ways. They pave the way for your vehicle to the next looping section – so you can really give it your all just before. The next corner, at a crossing or just before a hill – these are all ideal places for you and your car to give everything you have. Here you can really flex your full power and show your opponent just how fast you are. This set contains four straight sections, each with a length of 34.5 cm. Coming on a scale of 1:24, the standard straight sections are suitable for the Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION race tracks.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Set of 4 standard straight sections on a scale of 1:24
• DIGITAL 124, DIGITAL 132, Carrera EVOLUTION
• To expand your race track
• Package contents: 4 pieces, each 34.5 cm

With this corner, the next race will be a real challenge

A good Carrera race track includes straight sections, lane changes and, of course, corners. With this set you can expand your race track and extend it according to your wishes. It contains 6 corners, each one at 30°. Once assembled, you can integrate a long 180° corner into your race track. The track sections are also suitable for the 6-lane extension of the race track. The corner parts are built on a scale of 1:24 and can therefore be integrated into all tracks with the same scale: Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera Evolution. Build your race track according to your ideas and surprise your opponents.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension set – corner on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For a 6-lane extension
• Package contents: 6 pieces = 180 degrees (1 unit = 30 degrees)

A R3 curve of 180° take up a floor space of about 159 cm wide

A new corner for your race track

If you have a Carrera race track on a scale of 1:24, this track element is just the thing for its extension. In the package there are six corner parts, each 30°. If you put them all together, you create a big corner totalling 180°. First tear along the long straight sections, pull off your driving skills in the looping section and take the jump with flying colours, before hanging on with your opponent in the corner. As a slot car professional, you certainly know exactly how much speed and tact you need to steer your vehicle through the corner. The cornered sections are the ideal complement to your Carrera DIGITAL 124, Carrera DIGITAL 132 or Carrera EVOLUTION race tracks.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• 6-section corner set, 30 degrees each
• DIGITAL 124, DIGITAL 132, Carrera EVOLUTION
• As an extension and fine-tuning for your race track
• Package contents: 6 pieces (each 30 degrees) = 180 degrees

An R1 curve of 180° take up a floor space of about 80 cm wide.

Radius 3 Curve Inner Borders 22.5 degree x 4, to give your layout that extra touch of variation and excitement!

Shown with C8204 Radius 3 Curve 22.5° and C8224 Radius 3 Curve Outer Borders 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Features

• LED looping set with light and sound
• DIGITAL 143, Carrera GO!!! Plus, Carrera GO!!!
• For even more action and excitement
• Package contents: 8 looping sections, 3 straight sections á 114 mm

Improves the power of your track to locations away from the powerbase

From a total track length of 20 m and longer there may be a loss in current making.

There are many different reasons for having an additional power supply. It is possible that upwards of a certain track length the power may not be sufficient to supply the whole race track. The result is that the slot cars slow down or even stop. Nobody wants that! The race track also has an increased power requirement if several lane changes are used along the route, or if several vehicles are on the same track at the same time. To prevent this, you can use this 10-metre-long cable. You can install it as a cable between a track near your powerbase and another track, in order to supply the entire race track with enough electricity. So that your race runs really smoothly and you have plenty of fun on the race track!

Inserting a second powerbase is not a solution and is not possible (only one powerbase and power source per digital circuit).
The requisite additional power feed leads are available in lengths of 5 m (20584) and 10 m (20585).

The cables connectors locate tidily into the underside of the track.

Additional supply is compatible with both Evolution and DIGITAL Carrera layouts.

Contains 2 x 350mm Standard Straight Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8233 Lead In and Lead Out Borders (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

Ready for this corner?

Your opponent is already preparing to reduce the speed in order to drive through the corner with grace. Now it’s your turn to do the same! Throttle your speed and accelerate at the right moment to resume the wild chase with your opponent. With this set you get three 60° corners, which together make a generous 180° corner. Here your slot car can get acquainted with centrifugal force. The track parts of the corner come on a scale of 1:24 and can therefore be ideally combined with the DIGITAL 124, DIGITAL 132 and EVOLUTION race tracks. If you are looking for an extension for your race track, then these corner track sections are a good addition.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• 3-part set comprising corner track on a scale of 1:24
• DIGITAL 124, DIGITAL 132, Carrera EVOLUTION
• Corner 1: 1 piece = 60 degrees
• Package contents: 3 pieces = 180 degrees

An R1 curve of 180° take up a floor space of about 80 cm wide.

Carrera 20566 Radius 3 Banked Curve Outer Borders 30° (6 pcs)

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Contents

• x6 Radius 3 Banked Curve Outer Borders 30°
• x1 End Borders Right
• x1 End Borders Left

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.

One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

The elevated track crossover section comes as 2 x three-quarter length track sections with pillars. This assembly helps build a more rigid fly-over section than fly-overs supported simply by pillars. Multiple C8295 crossovers can be stacked on top of each other to build crazy stunt or action tracks.With the addition of two C8207 half straights, this bridge can replace a C8210 flat crossroad track section - converting a circuit with a crossroad to a figure-of-eight layout for even more fast-paced Scalextric action!

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2