Category Product Lists

Carrera GO!!! 61603 Radius 1 Curve 90° (2 pcs)

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• Curve Radius 1 90° x2
• Guard rail and supports

Drive the ideal racing line through the corner

Upgrade your Carrera race track with this lane change corner. The right corner consists of two track parts on a scale of 1:24 inviting you to overtake. From the outer track you can easily switch to the inner track and overtake your opponent. Then he has no chance of passing you until the next lane change. You can use it to upgrade your digital race tracks on a scale of 1:24. Carrera DIGITAL 124, and Carrera DIGITAL 132 are the suitable race tracks for this extension set. The extension part provides action and certainly causes one or the other crash throughout. If you don't pay attention when changing lanes, you will drive directly into the opponent's lane or will have to follow him. Use this track with care so that you also stay ahead of the pack!

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension of lane change corner for digital race tracks on a scale of 1:24
• DIGITAL 124, DIGITAL 132
• Digital lane changing and overtaking
• Package contents: 1x lane change corner – right, outside to inside (2 track parts)

The single lane half-straight can be used in conjunction with C7014 and C7015 pit lane sections to build exciting and innovative track features.

Also available to use with C7017 single lane curve to design single lane rally stages or pit roads. This section is compatible with both digital and standard Scalextric layouts.

Contains 4 x 175mm single lane half-straight.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: No

• Track Pieces Included: 4

Extending your Scalextric layout has never been easier!

The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts and features a 'one size fits all' concept.

Compatible with Digital and Standard sets.

Contents

• 8 x 350mm Straights.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital :Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 8

Radius 2 Curve Inner Borders 22.5 degree x 4, to give your layout that extra touch of variation and excitement!

Shown with C8234 Radius 2 Curve 22.5° and C8239 Radius 2 Curve Outer Borders 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Contains

• x2 End Borders Right
• x2 End Borders Left

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

• Track curb for the inside section
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For decorating the race track
• Package contents: Inner edge strip for corner 3/30° (6), end sections (2)

Protection and decorative track element in one: The inside curbs

Your Carrera EVOLUTION, DIGITAL 124 and DIGITAL 132 race tracks should be equipped with inside and outside curbs. The red and white curbs not only ensure a harmonious and more authentic overall picture, but also that your slot cars on a scale of 1:24 don't drive out over the track edges. Especially in tight corners where Carrera drivers pull off wild drifts in their cars, the corners should be extended with both the outside and inside curbs. The set includes six inside curbs for a 3/30° corner and two end sections. You can attach the strips to your race track in just a few simple steps. Let your creativity run free as you extend, expand and rediscover your Carrera race track time and time again!

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Carrera GO!!! 61601 Extension Set 2

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• x4 Carrera GO!!! 61602 Straight
• x4 Carrera GO!!! Straight 114mm
• x2 Carrera GO!!! Fly Over (to create a curve in mounted)
• x2 Carrera GO!!! 61609 Lane Change Section
• x1 Carrera GO!!! 61610 Narrow

Extending your Scalextric layout has never been easier!

The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 4

Radius 1 Curve Inner Borders 180 degree x 2, to give your layout that extra touch of variation and excitement!

Shown with C8201 Radius 1 Hairpin Curve 90° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Upgrade Kit to upgrade a GO!!! Track with wireless speed controller.

Contents

• x1 61673 Wireless Connecting Section
• x2 61677 Wireless Speed Controller
  

Use on straights ahead of corners to give an smooth lead in and lead out of corner borders sections.

Contains 2 x 350mm Lead In/Lead Out Borders Shown with C8205 Standard Straight (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes.