Category Product Lists

Contains Radius 4 Curve 22.5 degree x 2. Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with: C8282 Radius 4 Inner Borders 22.5° and C8238 Radius 4 Outer Borders 22.5° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

Rail connections for digital accessories

• Adapter Unit – connecting piece for digital accessories
• DIGITAL 124, DIGITAL 132
• Connecting track for Driver Display 30353, Startlight 30354 and Position Tower 3035
• Package contents: 1 piece (34.5 cm)

The connector for many accessories

With the Adapter Unit you have various options to expand your race track to include cool accessories. In principle, this is a standard straight line for DIGITAL 124/132 race tracks (34.5 cm) with two connectors on each side. The Driver Display (20030353), the Position Tower (20030357) and the Startlight (20030354) can be connected to the connectors. Make sure that the Adapter Unit is inserted into the circuit in the correct direction. Making sure that it has been correctly installed in the direction of travel with the slot cars is possible thanks to an arrow located on the side. For that authentic racing feeling, it is of course also possible to attach outside curbs.

Only be used with the Control Unit 30352.

This accessory is compatible with the following systems

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Exciting overtaking manoeuvres in the corner

With this extension set you can provide an extra kick for your race. With the lane change corner, the slot cars can switch to the other lane and continue their race there. If you then manage to put your car in front of the opponent's car, you will have an advantage because it can't get past you anymore. But be careful! A lane change can always lead to a crash. Choose the right time and gain an advantage in the fight for the title. The lane change corner consists of two track sections and is suitable for the digital race tracks Carrera DIGITAL 124 and Carrera DIGITAL 132 or the digitally retrofitted Carrera EVOLUTION on a scale of 1:24.

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension – lane change corner for the digital Carrera race tracks on a scale of 1:24
• DIGITAL 124, DIGITAL 132
• Digital lane changing and overtaking
• Package contents: 1x lane change curb – right, inside to outside (2 track parts)

Curvaceous racing fun for your race track

With this extension set you bring further driving fun on to your race track. The set contains a total of twelve 15° corners, which – if you build them all one after the other – result in a long 180° corner. Since there are many small sections, you can be very flexible in terms of structure. Besides a big corner, you can also build chicanes or S-bends with the track parts. With supports you can also take your race track to another level. Just build the 180° corner above the rest of the track and enjoy a race on several levels. Since the angle of these corners is relatively small, these extension parts are also suitable for an 8-lane expansion. The scale of the set is 1:24.

• Extension set – corner (4/15°) on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For an 8-lane extension
• Package contents: 12 pieces = 180 degrees (1 piece = 15 degrees)

An R4 curve of 180° take up a floor space of about 198 cm wide.

This accessory is compatible with the following systems

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

The Side Swipe Straights are use to create exciting bottleneck section or combine with C8201 Radius 1 Hairpin Curve 90° to create a tight and perilous hairpin.

Why not connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight to extend your Scalextric layout for even more high-speed racing action?

Contents

• 2 x 350mm Side Swipe Straights Push-fit Scalextric track for quick and easy circuit building.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

The Black Box is the command center. It controls all racing activities. All pieces of information are processed in the Black Box with the speed controllers and the transformer also being connected to it.

Digital racetrack system allows changing the lane and overtaking with up to 6 cars.

Improves the power of your track to locations away from the powerbase

From a total track length of 20 m and longer there may be a loss in current making.

There are many different reasons for having an additional power supply. It is possible that upwards of a certain track length the power may not be sufficient to supply the whole race track. The result is that the slot cars slow down or even stop. Nobody wants that! The race track also has an increased power requirement if several lane changes are used along the route, or if several vehicles are on the same track at the same time. To prevent this, you can use this 5-metre-long cable. You can install it as a cable between a track near your powerbase and another track, in order to supply the entire race track with enough electricity. So that your race runs really smoothly and you have plenty of fun on the race track!

Inserting a second powerbase is not a solution and is not possible (only one powerbase and power source per digital circuit).
The requisite additional power feed leads are available in lengths of 5 m (20584) and 10 m (20585).

The cables connectors locate tidily into the underside of the track.

Additional supply is compatible with both Evolution and DIGITAL Carrera layouts.

Special See-Saw Track Section

For use with Carrera GO!!! 1/43rd scale track with the deeper groove.

This accessory is compatible with the following systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Drift safely through the corner: thanks to outside curbs

It doesn't matter whether you just want to bring a little more visual racing feeling to your track or whether you want to ensure more safety when drifting with your slot cars on a scale of 1:24: With these outside curbs you can have a great extension for your race track. The extension set contains six curbs, each with 2 end sections. They are suitable for 2/30° corners and on a scale of 1:24. The typical red-white paint is found on the world’s race tracks just before, on and after a corner. Thanks to the colours, the curbs can already be seen from a distance by the drivers. The extensions can be used for the race tracks Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension parts – outside curb for corner 2/30° on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• In a red-white striped paint finish
• Package contents: 6 pieces

Extending your Scalextric layout has never been easier! The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts.

One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Features 'One size fits all' concept ; Compatible with Digital and Standard sets contents; Fits any sized layout; Contents: 2 x Racing Curves, Borders and Barriers. Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Includes

• 1x Standard Straight

• 2x Chicane Track

• 1x Leap - Take off

• 1x Leap -Landing

 

Extending your Scalextric layout has never been easier!

The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts and features a 'one size fits all' concept.

Compatible with Digital and Standard sets.

Contents

• 4 x 350mm Straights

• 4 x Radius 3 Curve 22.5°

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital :Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 8

Contains Radius 2 Curve Outer Borders 45 degree x 4.

Shown with C8206 Radius 2 Curve 45° and C8225 Radius 2 Curve Inner Borders 45° (not included).

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes