Category Product Lists

Carrera 85245 Track Connection Clips

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Contents

• x20 Track Connection Clips

For use with: C7017 Single Lane Radius 3 Curve 22.5° x 4.

Contents

• 4 x Single Lane Radius 3 Curve 22.5 degree Outer Borders x 4.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

Extending your Scalextric layout has never been easier!

The seven Scalextric Track Extension Packs are totally flexible in their design and any of these packs can be added to both Standard or Digital Scalextric circuits. Each pack can be incorporated into a Scalextric circuit, from simple ovals and figure-of-eight tracks to the largest layouts. One or more Track Extension Packs can be added to the same circuit, or you could use all the Track Extension Packs to make a hugely impressive circuit incorporating all the featured track pieces! The reverse side of the packaging explains how the Track Extension Pack can be incorporated into any number of layouts.

Please note: The Leap Ramp pieces found in Track Extension Pack 2 and the Ultimate Extension Pack are not suitable for Digital Circuits.

Features

• 'One size fits all' concept

• Compatible with Digital and Standard sets contents

• Fits any sized layout

Contents

• 1 x Leap (Ramp up and down)

• 2 x Standard Straight Track

• 2 x Side Swipes

• Borders and Barriers

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 4

Contains 2 x 87mm Quarter Straights Push-fit Scalextric track for quick and easy circuit building.

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

Carrera 85219 Guard Rail Supports

Contents

• x16 Guard Rail Supports
• x2 Guard rail connecting piece
• x4 End piece

Curbs as an optical detail for your race track

Curbs on long straight sections or on the straight sections shortly before or after a corner are not only visually attractive. Especially the big slot cars on a scale of 1:24 drift more easily and safely through the corners, if these and the track sections have been extended just before and after to include edge pieces. So the cars don't slip off the track so easily anymore. This set contains 4 edge pieces for 1/3 straight sections. With the typical red and white striped coating, the curbs can be seen from afar. The extension parts come on a scale of 1:24 and can be used accordingly for race tracks on the same scale.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension parts – curbs for 1/3 straight section on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• In a red-white striped paint finish
• Package contents: 4 pieces

This accessory is compatible with the following systems:

• Carrera DIGITAL 124
• Carrera DIGITAL 132

2 x 78mm Short Straights Push-fit Scalextric track for quick and easy circuit building and an unstoppable racing experience!

Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

Tech Specs

• Item Scale: 1:32 Scale

• Batteries Required: No

• License: No

• Compatible with ARC AIR/ARC ONE: Yes

• Compatible with ARC PRO/Digital: Yes

• Compatible with Spark Plug: Yes

• Track Pieces Included: 2

Carrera GO!!! 61641 Jump Ramp

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

A twisting challenge for your race track

With this extension set you can add another corner into your race track. With Carrera you always have the possibility to extend the race tracks according to your ideas. For this you need different straight sections, lane changes and even corners. This is how you deliver real racing excitement again and again. This set contains six corner pieces. They each have an incline of 30°. Built together, these six parts form a large 180° corner. Of course, you can also install the track parts individually. Due to the 30° angle, the extension parts are also ideal for the 4-lane expansion of your race track. The scale of the corner is 1:24 and is therefore suitable for the Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION race tracks.

This accessory is compatible with the following systems :

• Carrera Evolution
• Carrera DIGITAL 124
• Carrera DIGITAL 132

Features

• Extension set – corner on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• For a 4-lane extension
• Package contents: 6 pieces = 180 degrees (1 unit = 30 degrees)

An R2 curve of 180° take up a floor space of about 119 cm wide.

Carrera GO!!! 61611 Radius 1 Curve 45° (4 pcs)

This accessory is compatible with the followingn systems :

• Carrera GO!!!
• Carrera DIGITAL 143

Contents

• Radius 1 Curve 45° x4
• Guard rail and supports

For use with 30350 Narrow Left and 30351 Narrow Right.

This accessory is compatible with the following systems :

• Carrera DIGITAL 124
• Carrera DIGITAL 132

Contents

• x2 End Borders
• x2 Ascending Borders
• x2 Descending Borders